JETTA 87 is a semi-fluid wire rope lubricant designed to meet the lubrication and corrosion prevention requirements of wire ropes working under all conditions. Typical application areas are dockside and ship crane ropes, drag lines, hoists and mobile cranes. JETTA 87 will penetrate between the rope strands to provide integral lubrication and to provide both internal and external protection against corrosion caused by wet, adverse weather conditions and sea water.
COST SAVING BENEFITS ROPES
Provides excellent internal and external protection, extending rope service life
Addition of solid lubricant, reduces wear between the strands of the rope
Water repellant film ensures long film life extending re-lubrication intervals
Thin film eliminates fling off and does not collect abrasive particles
Ropes are clean to handle and allow easy inspection
Extensive covering power, resulting in economic usage
COST SAVING BENEFITS CHAINS
Penetrates into the chain pin and rollers while leaving thin protective outer film.
Addition of solid lubricant, reduces friction and wear extending service life of the chain.
Thin film eliminates fling off and does not collect abrasive materials.
Water repellent, ensuring long film life and extending re-lubricating intervals.
Extensive covering power, resulting in economic usage
METHOD OF APPLICATION
Apply sparingly by brush, do not over apply When the rope is in use, the capillary action of the lubricant will ensure full penetration to the core of the rope. Use straight from the container, even in cold weather. For best results, JETTA 87 should be applied to clean ropes to ensure complete penetration. (Should it not be possible to clean the ropes of previous lubricant, then apply JETTA 87 on top of the previous lubricant to soften it, work the rope for one week, then make a further application.